What are the daily maintenance elements of faucets?
The faucet is cheap. It doesn't need maintenance if it's broken? No! The normal use of the faucet is related to the convenience of our water use. We must pay attention to the daily maintenance. What are the elements of the daily maintenance of the faucet?
Daily maintenance elements of faucet 1: when professional personnel install the faucet, they should try not to bump with hard objects, and do not leave cement, glue and other things on the surface to prevent damage to the surface coating luster. If it is a new house, there must be sand and other impurities in the newly laid water supply pipe network. Before installation, it is necessary to remove the impurities in the pipe and drain water for a long time until the water quality is clear before installing the faucet.
The second element of daily maintenance of Faucet: when the water flow becomes small and the impurity water pressure is not less than 0.02MPa, if the water output is reduced, it may be that the faucet is blocked inside. The solution is to use a wrench to quietly screw the screen cover of the faucet at the outlet of the faucet, and then carefully install the impurities after cleaning. Generally, it can recover as before.
The third element of daily maintenance of Faucet: don't use too much effort when closing the faucet. Many people are used to making some efforts to close the faucet after using the faucet. It's not advisable to do so not only to prevent water leakage, but also to damage the sealing valve, resulting in lax closing of the faucet.
Four elements of daily maintenance of Faucet: good habits to ensure that it is complete as new to prevent rusting, and the appearance of faucet should be cleaned after normal use; moreover, faucet is generally prominent, so it is necessary to pay attention not to bump or press when taking and placing items.
In order to prevent unnecessary trouble caused by the replacement and installation of faucets, we can operate according to the daily maintenance elements of faucets, develop good living habits at home, and extend the service life of appliances.
Article source: Kaiping copper faucet manufacturer
-
07-03
What kind of faucet valve element are there?
1. Ceramic valve core:This is the most popular type of faucet valve core. Compared with other raw materials, the valve core has good sealing performance, good wear resistance and stable physical performance, so its service life is long. Even if the faucet is opened and closed for a long time and frequently, its sealing performance will not be weakened, and the natural faucet will not show water le
-
07-03
What do you think of the open flat copper faucet as copper or alloy?
In general, copper is brown red, aluminum white is slightly gray, iron gray is slightly black; there are many kinds of zinc alloy, and the alloy elements and shares are different in color. If you want to buy faucets, you'd better go to some shops with good promises. Because there are more and more faucets in the market now, but the quality is getting worse and worse. You will buy faucets with poo
-
07-03
What kinds of faucets are there?
A tap is a valve that controls the flow of water. The renewal speed of faucet is very fast. It has developed from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control. Now in many families, the stainless steel double temperature double control faucet is used, and the kitchen combined faucet is also presented.Now, more and more
-
07-03
How to distinguish the material of all copper faucet?
1. Look, the main high-quality copper faucet, after polishing and electroplating, has a bright and bright appearance, which can be seen by light, without corrosion mark or oxidation spot, while the alloy is not. Secondly, carefully observe whether the cross-section interface of the faucet is copper body. It's worth noting that many Philistines, in order to avoid this point, treat the cross-sectio