1. When the air temperature is lower than zero, if the handle of the faucet is found to be abnormal, it is necessary to scald the bathroom product with heat source water until the handle is normal, and then it can be used. Otherwise, it will affect the service life of the faucet valve core.
2. There will be water dripping after the faucet is closed, because there is water in the inner cavity after the faucet is closed, which is attributed to normal phenomenon. If for a long time, there is water dripping after ten minutes, it is water leakage, indicating that the product has quality problems.
3. Because the water contains a small amount of carbonic acid, and the scale will be formed simply after the metal surface transpiration, which will corrode the surface of the faucet, thus affecting the cleaning and service life of the faucet. Therefore, always use soft cotton cloth or sponge and neutral soapy water to scrub the appearance of the faucet (Note: it is not allowed to scrub with corrosive or acidic substances), and then use soft cloth to dry the appearance. Do not use metal wire ball or cloth with hard particles. In addition, do not hit hard objects to damage the appearance of the nozzle.
4. Don't use too much force to turn the tap on and off, just turn it quietly. Even the traditional faucet doesn't need a lot of effort to screw. In particular, do not use the handle as a handrail to support or use. Many people are used to making some efforts to close the faucet after using it, which is not desirable. This will not only prevent water leakage, but will damage the sealing valve, resulting in loose closure of the faucet.
5. When the water flow becomes smaller, impurities shall be removed. When the water pressure is no less than 0.02 MPa, if the water output is reduced, it may be blocked in the tap. The solution is to use a wrench at the faucet outlet to quietly screw the screen cover of the faucet, and then carefully install the impurities after cleaning. Generally, it can be restored as before.
Article source: Kaiping copper faucet manufacturer
07-03
What kind of faucet valve element are there?
1. Ceramic valve core:This is the most popular type of faucet valve core. Compared with other raw materials, the valve core has good sealing performance, good wear resistance and stable physical performance, so its service life is long. Even if the faucet is opened and closed for a long time and frequently, its sealing performance will not be weakened, and the natural faucet will not show water le
07-03
What do you think of the open flat copper faucet as copper or alloy?
In general, copper is brown red, aluminum white is slightly gray, iron gray is slightly black; there are many kinds of zinc alloy, and the alloy elements and shares are different in color. If you want to buy faucets, you'd better go to some shops with good promises. Because there are more and more faucets in the market now, but the quality is getting worse and worse. You will buy faucets with poo
07-03
What kinds of faucets are there?
A tap is a valve that controls the flow of water. The renewal speed of faucet is very fast. It has developed from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control. Now in many families, the stainless steel double temperature double control faucet is used, and the kitchen combined faucet is also presented.Now, more and more
07-03
How to distinguish the material of all copper faucet?
1. Look, the main high-quality copper faucet, after polishing and electroplating, has a bright and bright appearance, which can be seen by light, without corrosion mark or oxidation spot, while the alloy is not. Secondly, carefully observe whether the cross-section interface of the faucet is copper body. It's worth noting that many Philistines, in order to avoid this point, treat the cross-sectio