A tap is a valve that controls the flow of water. The renewal speed of faucet is very fast. It has developed from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control. Now in many families, the stainless steel double temperature double control faucet is used, and the kitchen combined faucet is also presented.

Now, more and more consumers buy faucets, will be from the material, function, shape and other aspects to consider. The main material of faucet is copper and zinc alloy. Hot faucets usually have a red indicator or symbol, while cold faucets usually have a blue or green indicator or symbol. In English speaking countries, faucets are often marked with an "H" or "C" for heat or cold. Most residential, commercial and industrial houses have a faucet in front of their doors. They are equipped with a four corner switch with an inner hole to prevent passers-by from using water indiscriminately.

1. According to the data, it can be divided into SUS304 stainless steel, cast iron, all plastic, brass, zinc alloy data faucet, polymer composite data faucet number category.

2. According to work, it can be divided into basins, bathtubs, showers, kitchen sink faucets and electric faucets (ceramic electric faucets). With the progress of living standards, the faucets that can be quickly heated (ceramic electric faucets) are more and more popular with consumers and are expected to become the new protagonists leading the faucet revolution.

3. According to the structure, it can be divided into single connection type, double connection type and triple connection type. In addition, there are single handle and double handle. The single connection type can be connected with cold water pipe or hot water pipe; the double connection type can be connected with cold and hot water pipes together, which is mostly used for the faucet of the washbasin in the bathhouse and the kitchen with hot water supply; the triple connection type can be connected with the shower nozzle, which is mainly used for the faucet of the bathtub, in addition to the cold and hot water pipes. The single handle faucet can regulate the temperature of cold and hot water through a handle, while the two hands handle need to be separated from the conditioning cold water pipe and hot water pipe to regulate the water temperature.

4. According to the open method, it can be divided into screw type, wrench type, lifting type and induction type, etc. When the screw handle is turned over, it needs to rotate a lot of circles; the wrench handle generally only needs to rotate 90 degrees; the lift handle only needs to lift up to get out of the water; the induction faucet only needs to extend its hand under the faucet to get out of the water actively. In addition, there is a kind of time-delay closed faucet. When the switch is turned off, the water will flow for a few seconds before it stops. In this way, when the faucet is turned off, the dirty things on the hands can be washed clean again.

5. According to the valve core, it can be divided into rubber core (slow opening valve core), ceramic valve core (fast opening valve core) and stainless steel valve core. The key to the quality of faucet is the valve element. The taps with rubber core are mostly screw type open cast iron taps, which have been basically screened; the ceramic valve core taps are presented in recent years, with better quality and more widespread; the stainless steel valve core is more suitable for areas with poor water quality.

Article source: Kaiping copper faucet manufacturer

　　http://www.bowei-faucet.com