I wonder if we have thought about why there are so many bubbles in the water flowing out of the tap? In fact, this is mainly because the water faucet is equipped with a bubbler, which can make the water more soft without splashing. I think some friends are still unfamiliar with the word "bubbler"Kaiping copper faucet manufacturerLet's talk about it.
What is a bubbler
The bubbler can make water and air mix abundantly, have the function of foaming, and then achieve the function of reducing water consumption and saving water. Now, as long as the faucet in the market is round, there is a bubbler installed on it. There is no bubbler for square and flat nozzles.
II. Function of bubbler
Generally speaking, there are three functions of installing the bubbler on the faucet at home
1. Filtration: the bubbler can filter some sediment and impurities in the water.
2. Water saving: the bubbler can make the water flow and air fully touch, forming the role of foaming, and then reduce the water consumption. Generally, the faucet installed with the bubbler saves about 50% of the water than the general one.
3. Splash proof: the water will become soft when mixed with air, reducing the impact force. It can prevent water splashing everywhere, and it can also play a good role in noise reduction.
How to clean the bubbler
As we said above, the bubbler can filter impurities. If it is too long, it will block and need to be cleaned. It can remove the bubbler, soak it in vinegar, clean the sundries with a small brush or other things, and then reinstall it.
This involves a question: how to disassemble the faucet bubbler?
Use a small screwdriver to extend into the gap of the frame of the foaming machine and force it to pry, turn over the top plastic top net, and take out the stainless steel net in the center (there are four). After cleaning, install it back in the order of disassembly (stainless steel mesh burr shall be upward, and finally the plastic top net shall be installed and clamped)
It's just that there are so many advantages to install a small bubbler in the faucet. We can also install a bubbler at home if we need it.
Article source: Kaiping copper faucet manufacturer
07-03
What kind of faucet valve element are there?
1. Ceramic valve core:This is the most popular type of faucet valve core. Compared with other raw materials, the valve core has good sealing performance, good wear resistance and stable physical performance, so its service life is long. Even if the faucet is opened and closed for a long time and frequently, its sealing performance will not be weakened, and the natural faucet will not show water le
07-03
What do you think of the open flat copper faucet as copper or alloy?
In general, copper is brown red, aluminum white is slightly gray, iron gray is slightly black; there are many kinds of zinc alloy, and the alloy elements and shares are different in color. If you want to buy faucets, you'd better go to some shops with good promises. Because there are more and more faucets in the market now, but the quality is getting worse and worse. You will buy faucets with poo
07-03
What kinds of faucets are there?
A tap is a valve that controls the flow of water. The renewal speed of faucet is very fast. It has developed from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control. Now in many families, the stainless steel double temperature double control faucet is used, and the kitchen combined faucet is also presented.Now, more and more
07-03
How to distinguish the material of all copper faucet?
1. Look, the main high-quality copper faucet, after polishing and electroplating, has a bright and bright appearance, which can be seen by light, without corrosion mark or oxidation spot, while the alloy is not. Secondly, carefully observe whether the cross-section interface of the faucet is copper body. It's worth noting that many Philistines, in order to avoid this point, treat the cross-sectio